Gas Solenoid Valve - UGS Series
Valve Information
Port:
Refer below technical data sheet (Available BSP)
End Connection:
Screwed
Body Material:
Aluminum Pressure Die Cast
Media Temp:
-30°C to 90°C
Diapharagm:
Nitrile (NBR)
Circumstance Temp:
-10°C to 70°C
Media:
Air, Natural Gas, Town Gas.
Main Features:
Flow adjustment, Opening time adjustment, Quick release initial flow adjustment
Operating Voltage & Power Consumption:
| 110AC | 230AC |
| 30W | 30W |
Other Specification Data:
Available on Request
Coil Information
Coil Features:
High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require..
Coil Housing:
IP65 Epoxy square coil & Power Saver Coil
Note:
Use of filter in the inlet port is recommended.
Coils are conforming as per IEC-60335-1 with derivatives (LVD / EMC).
Gas Solenoid Valve complies as per EN-161 requirement.
Pneumatic Circuit Diagram
Technical Data
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure mbar | Max. Operating Pressure mbar | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|
| UGS-201I | Aluminium | ½” | 15 | 0 | 500 | NBR | 4 |
| UGS-400K | Aluminium | 1” | 30 | 0 | 350 | NBR | 13 |
Diagram & Dimension (NC)
| Model No. | Port Size | Diagram No. | A | B | C | D | E | E1 |
|---|---|---|---|---|---|---|---|---|
| UGS-201I | ½” | 20.1 | 72 | 147 | 117 | 75 | 50 | 66 |
| UGS-400K | 1” | 20.2 | 108 | 164 | 132 | 97 | 71 | 105 |
Note:- All dimensions are in mm. All Dimensions are approx.
