Pilot Operated Diaphragm Type Plastic Solenoid Valve with Flow Controller (NC) - PNN Series
Specifications
Port:
Refer below technical data sheet ( BSP/NPT)
End Connection:
Screwed
Body Material:
Nylon GF
Diaphragm:
Natural Rubber
Max Media Temp:
5°C to 50°C
Circumstance Temp:
-10°C to 50°C
Media:
Water
Coil Housing:
IP65 Epoxy square coil, IP65 Metallic round enclosure, IP68 Weatherproof enclosure
Note:
Use of filter in the inlet port is recommended.
operating voltage:
| 24AC | 24DC | 12DC |
power consumption:
| 8W | 8W | 8W |
coil features:
High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require.
Other Specification Data:
Available on Request
Technical Data
| Model No. | Body Material | Pipe (Inch) | Orific (mm) | Min. Operating Pressure mbar | Max. Operating Pressure bar | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|
| PNN-3TF | Nylon GF | ¾” | 20 | 0.5 | 10 | Natural Rubber | 8 |
| PNN-4TF | Nylon GF | 1” | 25 | 0.5 | 10 | Natural Rubber | 12 |
| PNN-6TF | Nylon GF | 1½” | 40 | 0.5 | 10 | Natural Rubber | 23 |
| PNN-8TF | Nylon GF | 2” | 52 | 0.5 | 10 | Natural Rubber | 38 |
Feature
- Inbuilt Flow Control Capabilities.
- Manual Override in All The Valve.
- Pressure Below Seat to Reduce Water Hummer
- Low Head Loss With High Flow