Filter Regulator Combination - PD Series
Specifications
Model No:
| PD-FR1 | PD-FR7 | PD-FR2 | PD-FR3 | PD-FR4 |
Media:
Compressed Air
Port Size:
| G¼ | G³⁄₈ | G½ | G¾ | G1 |
Flow Rate LPM:
| 500 | 1800 | 3000 | 4250 | 5500 |
maximum supply pressure:
10 Bar, 20 Bar (Only for Metal Bowl)
Filtration:
1, 5, 25, 40 (Standard), 50, 100
Bowl Capacity:
| 9 | 32 | 44 | 165 | 165 |
installation:
Vertical
Materials of construction:
Aluminium, Brass, Steel, Acetal, SS, Nitrile
optional accessories:
Clamp, Modular mounting kit, Pressure Gauge
Pressure Gauge Port Size:
| G¹⁄₈ | G¹⁄₈ | G¹⁄₈ | G¼ | G¼ |
regulating pressure range:
0.2- 2, 0.2- 4, 0.5- 7, 0.5- 10 (Standard)
medium temperature:
+5°C to +50°C
Note:
Supply Pressure 7 bar, pressure drop Δp = 0.5bar (For Standard Models)
Features
| Category | Features |
|---|---|
|
Filter |
Bronze filtering element |
| Separator and shield for efficient moisture separation | |
| Press type manual drain for easy operation | |
|
Regulator |
Diaphragm operated, self relieving type |
| Pressure compensated by balanced poppet | |
| Non raising 'Press to lock' adjusting knob for locking at any set pressure | |
|
General Features |
Good flow and regulating characteristics |
| Modular type for easy and fast maintenance | |
| Suitable for wall mounting |
Precautions
- Note the direction of flow before installation and connect piping accordingly
- Flush pipings for dirt, dust, rust and other foreign particles.
- Install in clean atmosphere.
- Nipples of taper threads to be used with tape.Ensure teflon tape does not enter the unit during tightening Nipples of straight threads to be used with sealing washer
- Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents,trichloroethylene, kerosene or other aromatic hydrocarbons.
Pressure Setting
- Pull the knob and adjust by turning the knob clockwise to increase the pressure. Push the knob back to its locked position. (Turning the knob counter clockwise will reduce the pressure)
Technical Data
| Model No. | Diagram No. | W | V | A | B | E | F | ØG | J | K | L | T | U |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PD-FR1 | 1.1 | ¼" | ¹⁄₈” | 40 | 165 | 64 | 30 | 25 | 28 | 45 | 5.5 | 2 | M5 |
| PD-FR7 | 1.1 | ⅜” | ¹⁄₈” | 55 | 220 | 95 | 40 | 40 | 40 | 53 | 6.5 | 2 | M5 |
| PD-FR2 | 1.1 | ½” | ¹⁄₈” | 70 | 287 | 134 | 50 | 47 | 55 | 62 | 8.5 | 2 | M5 |
| PD-FR3 | 1.1 | ¾” | ¼" | 90 | 370 | 130 | 70 | 51 | 66 | 65 | 11 | 5 | M5 |
| PD-FR4 | 1.1 | 1" | ¼" | 90 | 370 | 130 | 70 | 51 | 66 | 65 | 11 | 5 | M5 |
