Polyurethane Tubes

Specification
Specification:
Tube ODMinimum bend radius (in mm)
Ø410
Ø615
Ø825
Ø1030
Ø1235
Ø14130
Ø16140
  • Recommended Pressure vs Working Temperature
  • Tube Size And Colour
  • Extra

Recommended Pressure vs Working Temperature

Maximum Pressure : 10 bar 9 bar 8 bar 7 bar
Ambient temperature : 5°C to 30°C 30°C to 40°C 40°C to 50°C 50°C to 60°C

Tube Size And Colour

Specification for Polyurethane Tube

Tube OD Tube ID Minimum bend radius (in mm) Blue Black Red Yellow Silver Transparent
4 2 10 PS0402B PS0402K PS0402R PS0402Y PS0402S PS0402T
6 4 15 PS0604B PS0604K PS0604R PS0604Y PS0604S PS0604T
8 5 25 PS0805B PS0805K PS0805R PS0805Y PS0805S PS0805T
10 7 30 PS1007B PS1007K PS1007R PS1007Y PS1007S PS1007T
12 8 35 PS1208B PS1208K PS1208R PS1208Y PS1208S PS1208T
14 10 130 PS1410B PS1410K PS1410R PS1410Y PS1410S PS1410T
16 12 140 PS1611B PS1611K PS1611R PS1611Y PS1611S PS1611T

Specification for Nylon Tube N6

Tube OD Tube ID Minimum bend radius (in mm) Blue Black Red Yellow Silver Transparent
4 2 20 N60402B N60402K N60402R N60402Y N60402S N60402T
6 4 40 N60604B N60604K N60604R N60604Y N60604S N60604T
8 6 50 N60806B N60806K N60806R N60806Y N60806S N60806T
10 8 60 N61008B N61008K N61008R N61008Y N61008S N61008T
12 10 80 N61210B N61210K N61210R N61210Y N61210S N61210T
14 12 100 N61412B N61412K N61412R N61412Y N61412S N61412T

Specification for Nylon Tube N12

Tube OD Tube ID Minimum bend radius (in mm) Blue Black Red Yellow Silver Transparent
4 2.5 20 N10425B N10425K N10425R N10425Y N10425S N10425T
6 4 40 N10604B N10604K N10604R N10604Y N10604S N10604T
8 6 50 N10806B N10806K N10806R N10806Y N10806S N10806T
10 8 60 N11008B N11008K N11008R N11008Y N11008S N11008T
12 9 80 N11209B N11209K N11209R N11209Y N11209S N11209T
14 12 100 N11412B N11412K N11412R N11412Y N11412S N11412T

Advantages: Provide differentiation of air line in pneumatic circuits.

Usage Instructions :

  • Cut the tube - end burr free and square, using Tube cutter ( WC1 ) and clean the edge to ensure leak tight joints. (Do not use blunt tools / hacksaw / chisel etc,.)
  • Ensure the tube is fully inserted into the fitting - until the positive stop, beyond the 'U' seal.
  • For ensuring proper insertion, pull the tube gently by hand. Polyurethane tube will yield and come out if pulled heavily.
  • Minimum bend radius of the tubing to avoid leakage.