2/2 Way Pilot Operated High Flow Auto Drain Solenoid Valve (NC)
Valve Specification
Port:
½” - BSP (F)
End Connection:
Screwed
Body Material:
CF8 / CF8M
Media Temp:
| -30°C to 90°C | -10°C to 140°C | -10°C to 180°C | -10°C to 180°C |
Diaphragm:
| Nitrile (NBR) | EPDM | Viton (FKM) | SPL. Viton |
Circumstance Temp:
-10°C to 70°C
Media:
Air, Water, Chemical, Gas
Main Features:
Internal Parts are in superior corrosion resistance steel
Coil Features:
High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require.
Coil Housing:
IP-65 Epoxy square coil
Operating Voltage:
| 230V AC | 12V DC | 24V DC |
| 09W | 09W | 09W |
timing:
Cycle : 1 min to 120 min Adjustable Drain : 1 sec to 25 sec Adjustable
Timer Circuit Modal Chart
Features
- Easy to mount at all locations.
- On / Off timing adjustable
- Maintains and cleans drain valves without removing from.
- Condensate discharging is no more problem.
- Large orifice for effective drain of dust and condensate.
- Design specially to drain sludge and rust laden condensate.
Technical data
| Valve Model No. | Timer Model No. | Coil Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Pilot Pressure Kg/cm² | Operating Pressure Range Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|---|---|
| AP2E125 | T11A | MAI09SV1 | CF8 | ½” | 12.5 | 4-8 | 0-16 | NBR / EPDM / Viton / SPL. Viton | 0.20 |
