3/2 - 2/2 Way Direct Acting Valve (NC) - DAC Series

Valve Information
Port:

Refer below technical data sheet (Available BSP / NPT)

End Connection:

Screwed

Body Material:

SS ASTM A351 Grade CF8 / CF8M, Forged Brass, Aluminium

Media Temp & seal o ring:
Nitrile(NBR)EPDMViton(FKM)PTFE
-30°C to 90°C-10° C to 140°C-10°C to 180°C-10°C to 180°C
Circumstance Temp:

-10° C to 70° C

Media:

Air, Water, Chemical, Gas, Oil, Diesel, Kerosene, LPG.

Main Features:

Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.

Operating Voltage & Power Consumption:
24AC110AC230AC12DC24DC
7W8W8W10W11W
Optional Feature:

90% Power saver series also available

Other Specification Data:

Available on Request

Coil Information
Coil Features:

High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require.

Coil Housing:

Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure.

Note:

Use of filter in the inlet port is recommended.

  • Pneumatic Circuit Diagram
  • Technical Data
  • Diagram & Dimension (NC)

Pneumatic Circuit Diagram

Technical Data

Model No. Body Material Pipe (Inch) Orifice (mm) Min. Operating Pressure Kg/cm² Max. Operating Pressure Kg/cm² Seal & Diaphragm Material Flow Factor Kv m³ / hr
NC NO NC NO
DA-TA119E025 Aluminium ¼” 2.5 - 0 5 NBR / SI / FKM / EPDM 0.16 -
DA-TA104E015 Aluminium ¼” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DA-TA105E009 Aluminium ¼” 0.9 0.9 0 16 NBR / SI / FKM / EPDM 0.03 0.03
DA-TA111E009 Aluminium ¼ 0.9 0.9 0 25 NBR / SI / FKM / EPDM 0.03 0.03
DA-TA118E009 Aluminium ¼ 0.9 0.9 0 40 NBR / SI / FKM / EPDM 0.03 0.018
DA-TA104R1E015 Aluminium In : ¼”, Out : Namur 1.5 - 0 10 NBR / SI / FKM / EPDM 0.07 -
DCP-T1RBT050 Aluminium In : ¼”, Out : Namur 5 - 0 10 NBR / SI / FKM / EPDM 0.73 -
DA-TA704E015 Aluminium ³⁄₈” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DA-TA204E015 Aluminium ½” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DA-TA205E009 Aluminium ½” 0.9 0.9 0 16 NBR / SI / FKM / EPDM 0.03 0.03
DA-TB004E015 Brass ¹⁄₈” 1.5 NA 0 10 NBR / SI / FKM / EPDM 0.07 -
DA-TB119E025 Brass ¼” 2.5 NA 0 5 NBR / SI / FKM / EPDM 0.16 -
DA-TB104E015 Brass ¼” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DA-TB105E009 Brass ¼” 0.9 0.9 0 16 NBR / SI / FKM / EPDM 0.03 0.03
DA-TB111E009 Brass ¼” 0.9 0.9 0 25 NBR / SI / FKM / EPDM 0.03 0.03
DA-TB118E009 Brass ¼” 0.9 0.9 0 40 NBR / SI / FKM / EPDM 0.03 0.03
DA-TB719E025 Brass ³⁄₈” 2.5 NA 0 5 NBR / SI / FKM / EPDM 0.16 -
DA-TB704E015 Brass ³⁄₈” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DA-TB705E009 Brass ³⁄₈” 0.9 0.9 0 16 NBR / SI / FKM / EPDM 0.03 0.03
DA-TB711E009 Brass ³⁄₈” 0.9 0.9 0 25 NBR / SI / FKM / EPDM 0.03 0.03
DA-TB219E025 Brass ½” 2.5 NA 0 5 NBR / SI / FKM / EPDM 0.16 -
DA-TB204E015 Brass ½” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DA-TB211E009 Brass ½” 0.9 0.9 0 25 NBR / SI / FKM / EPDM 0.03 0.03
DA-TB205E009 Brass ½” 0.9 0.9 0 16 NBR / SI / FKM / EPDM 0.03 0.03
DA-TB218E009 Brass ½” 0.9 0.9 0 40 NBR / SI / FKM / EPDM 0.03 0.03
DA-T119E025 SS304 ¼” 2.5 NA 0 5 NBR / SI / FKM / EPDM 0.16 -
DA-T104E015 SS304 ¼” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DA-T105E009 SS304 ¼” 0.9 0.9 0 16 NBR / SI / FKM / EPDM 0.03 0.03
DA-T118E009 SS304 ¼” 0.9 0.9 0 40 NBR / SI / FKM / EPDM 0.03 0.03
DA-T111E009 SS304 ¼” 0.9 0.9 0 25 NBR / SI / FKM / EPDM 0.03 0.03
DA-T719E025 SS304 ³⁄₈” 2.5 NA 0 5 NBR / SI / FKM / EPDM 0.16 -
DA-T704E015 SS304 ³⁄₈” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DA-T705E009 SS304 ³⁄₈” 0.9 0.9 0 16 NBR / SI / FKM / EPDM 0.03 0.03
DA-T711E009 SS304 ³⁄₈” 0.9 0.9 0 25 NBR / SI / FKM / EPDM 0.03 0.03
DA-T219E025 SS304 ½” 2.5 NA 0 5 NBR / SI / FKM / EPDM 0.16 -
DA-T204E015 SS304 ½” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DA-T205E009 SS304 ½” 0.9 0.9 0 16 NBR / SI / FKM / EPDM 0.03 0.03
DA-T211E009 SS304 ½” 0.9 0.9 0 25 NBR / SI / FKM / EPDM 0.03 0.03
DCP-T1UT050 Aluminium ¼” 5 NA 0 10 NBR / SI / FKM / EPDM 0.73 -
DA-TA104C012 Aluminium ¼” 1.2 NA 0 10 NBR / SI / FKM / EPDM 0.04 -
DA-TB014C025 Brass ¹⁄₈” 2.5 NA 0 3 NBR / SI / FKM / EPDM 0.16 -
DA-TB004C012 Brass ¹⁄₈” 1.2 NA 0 10 NBR / SI / FKM / EPDM 0.04 -
DA-TB104C012 Brass ¼” 1.2 NA 0 10 NBR / SI / FKM / EPDM 0.04 -
DA-TB103C012 Brass ¼” 1.2 NA 0 7 NBR / SI / FKM / EPDM 0.04 -
DA-TB114C025 Brass ¼” 1.2 NA 0 3 NBR / SI / FKM / EPDM 0.04 -
DA-T103C016 SS304 ¼” 1.2 NA 0 7 NBR / SI / FKM / EPDM 0.04 -

Diagram & Dimension (NC)

Model No. Port Size Diagram No. A B C E E1
DA-TA104E015 ¼” 18.1 45 93 83 44 60
DA-TB104E015 ¼” 18.1 43 95 86 44 60
DA-T104E015 ¼” 18.1 43 95 85 44 60
DA-TB704E015 ³⁄₈” 18.1 48 100 86 44 60
DA-TB204E015 ½” 18.1 48 100 87 44 60
DA-T204E015 ½” 18.1 48 100 86 44 60
DA-TB004C012 ⅛” 18.1 38 60 51 28 33
DA-TB104C012 ¼” 18.1 38 60 51 28 33

Note:- All dimensions are in mm. In normally open valve dimension B&C will increase up to 8mm.