High Pressure Pilot Operated Diaphragm Type Solenoid Valve (NC / NO) - PBU Series
Specification
Port:
¾” , ½” & 1" (Available BSP / BSPT / NPT - (F))
End Connection:
Screwed
Body Material:
SS ASTM A351 Grade CF8 / CF8M ,Forged Brass
Diaphragm:
| PUR | -10°C to 50°C |
Circumstance Temp:
-10°C to 70°C
Media:
Air
Main Features:
Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.
Operating Voltage & Power Consumption:
| 230AC | 12DC | 24DC | 110VAC |
| 10W | 10W | 10W | 10W |
Other Specification Data:
Available on Request.
Coil Features:
High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require.
Coil Housing:
IP65 Epoxy square coil
Note:
Use of filter in the inlet port is recommended.
Technical Data
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|
| PBU-2Y | BRASS | ½” | 15 | 1.5 | 40 | PUR | 3150 |
| PBU-2ZY | BRASS | ½” | 15 | 1.5 | 40 | PUR | 3150 |
| PBU-3Y | BRASS | ¾” | 15 | 1.5 | 40 | PUR | 3550 |
| PBU-3ZY | BRASS | ¾” | 15 | 1.5 | 40 | PUR | 3550 |
Application
- High Switching Cycle
- Blow Molding Equipment
Features
- Fast Response Time
- High Pressure
- Higher Service Life
- PUR Diaphragm
- Inbuilt Filter
- Reduce Unnecessary Volume Inside the Pilot Chamber
- Minimal Disruption of Response Time
Diagram & Dimension
| Model No.. | Port Size | Diagram No. | A | B | C | D | E | F |
|---|---|---|---|---|---|---|---|---|
| PBU-2Y | ½” | 17.1 | 80 | 119 | 102 | 54 | 40 | 76 |
| PBU-2ZY | ½” | 17.1 | 80 | 116 | 100 | 54 | 40 | 76 |
| PBU-3Y | ¾” | 17.1 | 80 | 119 | 102 | 54 | 40 | 76 |
| PBU-3Y | ¾” | 17.1 | 80 | 119 | 101 | 54 | 40 | 76 |
