High Pressure Pilot Operated Diaphragm Type Solenoid Valve (NC) - PBU Series

Specification
Port:

¾” & ½” (Available BSP / BSPT / NPT - (F))

End Connection:

Screwed

Body Material:

SS ASTM A351 Grade CF8 / CF8M ,Forged Brass

Diaphragm:
PUR-10°C to 50°C
Circumstance Temp:

-10°C to 70°C

Media:

Air

Main Features:

Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.

Operating Voltage & Power Consumption:
230AC12DC24DC110VAC
10W10W10W10W
Other Specification Data:

Available on Request.

Coil Features:

High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require.

Coil Housing:

IP65 Epoxy square coil

Note:

Use of filter in the inlet port is recommended.

  • Technical Data
  • Application
  • Features
  • Diagram & Dimension

Technical Data

Model No. Body Material Pipe (Inch) Orifice (mm) Min. Operating Pressure Kg/cm² Max. Operating Pressure Kg/cm² Seal & Diaphragm Material Flow Factor Kv m³ / hr
PBU-2Y BRASS ½” 15 1.5 40 PUR 3550
PBU-3Y BRASS ¾” 15 1.5 40 PUR 3550

Application

  • High Switching Cycle
  • Blow Molding Equipment

Features

  • Fast Response Time
  • High Pressure
  • Higher Service Life
  • PUR Diaphragm
  • Inbuilt Filter
  • Reduce Unnecessary Volume Inside the Pilot Chamber
  • Minimal Disruption of Response Time

Diagram & Dimension

Model No.. Port Size Diagram No. A B C D E F
PBU-2Y ½” 17.1 80 119 101 54 40 76
PBU-3Y ¾” 17.1 80 119 101 54 40 76