2/2 Way Pilot Operated High Flow Auto Drain Solenoid Valve (NC)

Valve Specification
Port:

½” - BSP (F)

End Connection:

Screwed

Body Material:

CF8 / CF8M

Diaphragm:
Nitrile (NBR)EPDMViton (FKM)SPL. Viton
Media Temp:
-30°C to 90°C-10°C to 140°C-10°C to 180°C-10°C to 180°C
Circumstance Temp:

-10°C to 70°C

Media:

Air, Water, Chemical, Gas

Main Features:

Internal Parts are in superior corrosion resistance steel

Coil Features:

High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require.

Coil Housing:

IP-65 Epoxy square coil

Operating Voltage:
230V AC12V DC24V DC
09W09W09W
timing:

Cycle : 1 min to 120 min Adjustable Drain : 1 sec to 25 sec Adjustable

  • Timer Circuit Modal Chart
  • Features
  • Technical data

Timer Circuit Modal Chart

Features

  • Easy to mount at all locations.
  • On / Off timing adjustable
  • Maintains and cleans drain valves without removing from.
  • Condensate discharging is no more problem.
  • Large orifice for effective drain of dust and condensate.
  • Design specially to drain sludge and rust laden condensate.

Technical data

Valve Model No. Timer Model No. Coil Model No. Body Material Pipe (Inch) Orifice (mm) Pilot Pressure Kg/cm² Operating Pressure Range Kg/cm² Seal & Diaphragm Material Flow Factor Kv m³ / hr
AP2E125 T11A MAI09SV1 CF8 ½” 12.5 4-8 0-16 NBR / EPDM / Viton / SPL. Viton 0.20