Refer below technical data sheet (Available BSP / NPT)
Screwed / Flange
SS ASTM A351 Grade CF8 / CF8M
PTFE + SPL. Viton , PTFE + NBR
-10°C to 180°C ,-10°C to +90°C
-10°C to 70°C
Steam, Hot Water, Hot Fluid, Oil
Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.
24AC | 110AC | 230AC | 12DC | 24DC |
15W |
90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces.
Available on Request. - Manual Override
High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require.
IP65 Epoxy square coil, IP65 Metallic round enclosure, IP67 Flameproof enclosure, IP68 Weatherproof enclosure.
Use of filter in the inlet port is recommended.
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
HCP-2I | CF8 / CF8M | ½” | 17 | 1.5 | 12 | SPL VITON | 4 |
HCP-3I | CF8 / CF8M | ¾” | 20 | 1.5 | 12 | SPL VITON | 7 |
HCP-4I | CF8 / CF8M | 1” | 25 | 1.5 | 12 | SPL VITON | 12 |
HCP-5I | CF8 / CF8M | 1¼” | 36 | 1.5 | 12 | SPL VITON | 23 |
HCP-6I | CF8 / CF8M | 1½” | 36 | 1.5 | 12 | SPL VITON | 23 |
HCP-8I | CF8 / CF8M | 2” | 47 | 1.5 | 12 | SPL VITON | 38 |
HCP-A254I | CF8 / CF8M | ½” | 17 | 4 | 45 | PTFE | 4 |
HCP-A354I | CF8 / CF8M | ¾” | 20 | 4 | 45 | PTFE | 7 |
HCP-A454I | CF8 / CF8M | 1” | 25 | 4 | 45 | PTFE | 12 |
HCP-A554I | CF8 / CF8M | 1¼” | 36 | 4 | 45 | PTFE | 23 |
HCP-A654I | CF8 / CF8M | 1½” | 36 | 4 | 45 | PTFE | 23 |
HCP-A854I | CF8 / CF8M | 2” | 47 | 4 | 45 | PTFE | 38 |
All dimensions are approx
Model No. | Port Size | Diagram No. | A | B | C | D | E | F |
---|---|---|---|---|---|---|---|---|
HCP-2I | ½” | 18.1 | 67 | 138 | 110.5 | 60 | 50 | 63 |
HCP-3I | ³⁄₄” | 18.1 | 81 | 145.2 | 112.5 | 71 | 50 | 63 |
HCP-4I | 1” | 18.1 | 96 | 161 | 120 | 75 | 50 | 63 |
HCP-5I | 1¼” | 18.1 | 108 | 169.5 | 123.5 | 96 | 50 | 63 |
HCP-6I | 1½” | 18.1 | 108 | 169.5 | 123.5 | 96 | 50 | 63 |
HCP-8I | 2” | 18.1 | 132 | 196 | 140.8 | 114 | 50 | 63 |
Note:- All dimensions are in mm. In normally open valve dimension B&C will increase up to 8mm.