Pilot Operated Piston Type Steam Valve (NC / NO) - HCP Series

Valve Information
Port:

Refer below technical data sheet (Available BSP / NPT)

End Connection:

Screwed / Flange

Body Material:

SS ASTM A351 Grade CF8 / CF8M

Diaphragm:

PTFE + SPL. Viton , PTFE + NBR

Media Temp:

-10°C to 180°C ,-10°C to +90°C

Circumstance Temp:

-10°C to 70°C

Media:

Steam, Hot Water, Hot Fluid, Oil

Main Features:

Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.

Operating Voltage & Power Consumption:
24AC 110AC 230AC 12DC 24DC
15W
Optional Feature:

90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces.

Other Specification Data:

Available on Request. - Manual Override

Coil Information
Coil Features:

High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require.

Coil Housing:

IP65 Epoxy square coil, IP65 Metallic round enclosure, IP67 Flameproof enclosure, IP68 Weatherproof enclosure.

Note:

Use of filter in the inlet port is recommended.

  • Pneumatic Circuit Diagram
  • Technical Data
  • Diagram & Dimension (NC)

Pneumatic Circuit Diagram

Technical Data

Model No. Body Material Pipe (Inch) Orifice (mm) Min. Operating Pressure Kg/cm² Max. Operating Pressure Kg/cm² Seal & Diaphragm Material Flow Factor Kv m³ / hr
HCP-2I CF8 / CF8M ½” 17 1.5 12 SPL VITON 4
HCP-3I CF8 / CF8M ¾” 20 1.5 12 SPL VITON 7
HCP-4I CF8 / CF8M 1” 25 1.5 12 SPL VITON 12
HCP-5I CF8 / CF8M 1¼” 36 1.5 12 SPL VITON 23
HCP-6I CF8 / CF8M 1½” 36 1.5 12 SPL VITON 23
HCP-8I CF8 / CF8M 2” 47 1.5 12 SPL VITON 38
HCP-A254I CF8 / CF8M ½” 17 4 45 PTFE 4
HCP-A354I CF8 / CF8M ¾” 20 4 45 PTFE 7
HCP-A454I CF8 / CF8M 1” 25 4 45 PTFE 12
HCP-A554I CF8 / CF8M 1¼” 36 4 45 PTFE 23
HCP-A654I CF8 / CF8M 1½” 36 4 45 PTFE 23
HCP-A854I CF8 / CF8M 2” 47 4 45 PTFE 38

Diagram & Dimension (NC)

All dimensions are approx

Model No. Port Size Diagram No. A B C D E F
HCP-2I ½” 18.1 67 138 110.5 60 50 63
HCP-3I ³⁄₄” 18.1 81 145.2 112.5 71 50 63
HCP-4I 1” 18.1 96 161 120 75 50 63
HCP-5I 1¼” 18.1 108 169.5 123.5 96 50 63
HCP-6I 1½” 18.1 108 169.5 123.5 96 50 63
HCP-8I 2” 18.1 132 196 140.8 114 50 63


Note:- All dimensions are in mm. In normally open valve dimension B&C will increase up to 8mm.